Bathroom Waterproofing
in Delhi NCR
Fix tile-joint leakage, wet walls & seepage into rooms below — permanently. Expert bathroom waterproofing with tile-break or no-tile-break options.
Why Bathroom Waterproofing Fails in Delhi Homes
Most bathroom leakage in Delhi homes is not a plumbing problem — it is a waterproofing failure. Builders often apply thin, low-quality acrylic paint as a waterproof coat instead of a proper membrane. Within 2–3 years, tiles crack and re-grout joints open, allowing water to seep through the screed and RCC slab to the ceiling below.
Bhawani Technologies inspects the actual failure point — tile joints, corner junctions, floor screed, or the slab itself — and applies the right treatment. In many cases, we can fix the leakage without breaking a single tile.
Bathroom Waterproofing Systems We Use
Membrane Waterproofing (Under Tiles)
Full membrane system applied on the floor screed and walls before tiling. Provides a continuous, seamless barrier that traps zero water below the tile layer.
Tile-Joint Epoxy Grouting
Existing tile joints re-grouted with waterproof epoxy grout. Seals micro-cracks at joints where most bathroom leakage originates — without breaking tiles.
Corner & Junction Sealing
Floor-wall and wall-wall junctions are the highest-risk points. We apply flexible PU sealant tape + corner fillet for 100% watertight corners.
Cementitious Slurry Coating
2–3 coats of polymer-modified cementitious waterproofing applied directly to masonry walls and floor slab before tiling. Food-safe, non-toxic.
Acrylic Tanking Coat
Flexible acrylic-based waterproof coating applied to wall surfaces to prevent dampness from seeping through bathroom walls into adjoining rooms.
Why Delhi Trusts Bhawani Technologies
Frequently Asked Questions
Why is my bathroom leaking into the room below?
Bathroom leakage to the floor below is typically caused by failed tile joints, cracked floor screed, missing or degraded waterproofing membrane below the tiles, or leaking pipe joints. Without a proper waterproofing layer beneath the tiles, water seeps through micro-cracks and collects above the RCC slab before dripping through. Bhawani Technologies diagnoses the exact entry points and applies a targeted fix.
Do I need to break all bathroom tiles for waterproofing?
Not always. For minor tile-joint seepage, we can apply epoxy grout and sealant without breaking tiles. However, for a permanent, long-lasting solution — especially where the waterproofing membrane below tiles has failed — tile removal and re-laying with a proper membrane is recommended. Bhawani Technologies will advise the right approach after inspection.
How much does bathroom waterproofing cost in Delhi?
Bathroom waterproofing in Delhi typically costs ₹150–₹400 per sq. ft. depending on tile-break or no-tile-break approach, bathroom size, and severity of damage. Call +91 76777 79418 for a free site assessment and quote.
How long does bathroom waterproofing last?
A properly applied bathroom waterproofing system (with membrane below tiles) lasts 8–12 years. Tile-joint sealant maintenance may be needed every 3–5 years. Bhawani Technologies uses high-quality materials from Dr. Fixit and Pidilite for maximum durability.
Can bathroom waterproofing be done without disturbing residents?
Yes. For surface-level treatments (tile-joint sealing, grout injection), work is completed in 1–2 days with minimal disruption. For full tile-break waterproofing, the bathroom is out of use for 5–7 days. Bhawani Technologies plans work to minimise inconvenience.
Fix Your Bathroom Leakage Today
Free site inspection anywhere in Delhi NCR. Our expert identifies the exact leakage source and tells you upfront whether tiles need to be broken — before any work begins.